Indiziert in
  • Genamics JournalSeek
  • Akademische Schlüssel
  • JournalTOCs
  • Nationale Wissensinfrastruktur Chinas (CNKI)
  • Zugang zu globaler Online-Forschung in der Landwirtschaft (AGORA)
  • Zentrum für Landwirtschaft und Biowissenschaften International (CABI)
  • RefSeek
  • Verzeichnis der Indexierung von Forschungszeitschriften (DRJI)
  • Hamdard-Universität
  • EBSCO AZ
  • OCLC – WorldCat
  • Gelehrtersteer
  • SWB Online-Katalog
  • Publons
  • Euro-Pub
  • Google Scholar
Teile diese Seite
Zeitschriftenflyer
Flyer image

Abstrakt

Optimization of Operational Parameters in a Cyclone Type Pneumatic Rice Polisher

Samadder M, Someswararao CH and Das SK

A pneumatic rice polishing system has been developed to minimize broken content (BP) and maximize the degree of polishing (DP). This polisher consists of a metallic cyclone coated with hard abrasive material, a blower, a collection system. Brown rice is feed vertically at the rate of 1.5 kg/min that flows towards the abrasive cyclone through horizontal air flow at 72.2 m/s. Experiments were carried out at different moisture content (M) and grit size of abrasive material (E) at fixed number of passes. Degree of polishing and broken content varied with both M and E. System showed DP from 4.224 ± 0.02% (13% M and 60 E) to 13.250 ± 0.56% (12% M and 36 E) whereas BP from 2.146 ± 0.14% (10% M and 60 E) to 49.717 ± 2.64% (13% M and 36 E). Effect of M and E and their square were found significant (p < 0.05 and p < 0.01) on DP and BP. Optimum values of DP and BP were achieved at 100 E and 11.70% M (wet basis) respectively with a value of 10.359% and 0.476%.

Haftungsausschluss: Dieser Abstract wurde mit Hilfe von Künstlicher Intelligenz übersetzt und wurde noch nicht überprüft oder verifiziert.